Five Reputable Solar Bracket Manufacturers in China 2026: Advancing Solar Energy Infrastructure

Exploring Solar Bracket Technologies, Product Designs and Industry Applications

CALIFORNIA, CA, UNITED STATES, October 21, 2026 /EINPresswire.com/ -- China's solar bracket manufacturing sector serves a broad range of photovoltaic (PV) installations, from residential rooftops and commercial buildings to utility-scale solar farms and agricultural projects. According to Global Market Insights, the global solar PV mounting systems market was valued at USD 49.7 billion in 2025 and is projected to reach USD 83.2 billion by 2035, reflecting continued demand for mounting solutions across different installation environments.

This industry review profiles five China-based companies active in solar mounting systems: Xiamen 9Sun Solar Technology Co., Ltd., Arctech Solar Holding Co., Ltd., GREENERGY New Energy Technology Co., Ltd., Tianjin Wenli New Energy Technology Co., Ltd., and Guangdong Aikon Metal Technology Co., Ltd. Their product categories and market positioning provide reference points for understanding the range of mounting solutions available from Chinese manufacturers.

The article is not a ranking by revenue, shipment volume or market share. It considers publicly available company information, product specifications where disclosed, and technical factors relevant to solar mounting system selection.

Industry Context: Product Design and Material Selection

As solar PV deployment expands, mounting structures remain an important part of project engineering. A suitable system must account for roof or ground conditions, wind and snow loads, module compatibility, corrosion exposure and installation requirements. These considerations influence the choice of solar panel mounting brackets as well as the wider solar mounting structure.

Product configurations vary by application. Ground Solar Bracket systems are commonly used in ground-mounted projects, while Flat Roof Solar Bracket and Metal Roof Solar Bracket designs serve different rooftop conditions. Carport Solar Bracket systems combine parking infrastructure with PV generation, and Farm Solar Bracket systems support agricultural applications where equipment access and available clearance are important.

Other configurations address installation flexibility. Adjustable Tilt Solar Bracket products allow the mounting angle to be set within a specified range, while Quick-Install Solar Bracket and Pre-Assembled Solar Bracket designs can help reduce on-site assembly work. Non-Penetrating Solar Bracket systems may be suitable for certain roofs where limiting roof penetrations is a priority, subject to structural calculations and project requirements.

Material selection also affects performance and service life. Aluminum Solar Bracket systems are valued for their relatively low weight and corrosion resistance. Stainless Steel Solar Bracket components are used where their mechanical and corrosion properties are appropriate, while Galvanized Steel Solar Bracket structures are common in applications requiring steel strength and protective coatings. A Corrosion-Resistant Solar Bracket specification should identify the actual alloy or steel grade, surface treatment, hardware and relevant environmental conditions.

Compliance documentation is another consideration. UL 2703 addresses mounting systems and related bonding and grounding equipment for flat-plate PV modules and panels. Buyers evaluating a CE Certified Solar Bracket, UL Listed Solar Bracket or TUV Certified Solar Bracket should verify the applicable declaration, listing or certificate, including the covered product family and the relevant testing scope. A general reference to a standard does not, by itself, establish product certification.

Global Market Insights identifies aluminum as a major material in the solar PV mounting systems market, reporting a 71.5% share by material in 2025. Steel remains relevant for projects requiring different structural characteristics or load-bearing configurations. For international shipments, customs classification may also depend on material and product construction; HS codes 7610.90 and 7308.90 are potential reference categories for certain aluminum and steel structures, respectively, subject to confirmation by the relevant customs authority.

How the Five Companies Were Compared

The review considers five practical factors:

• Manufacturing footprint: Disclosed production locations, manufacturing arrangements and stated capacity.
• Materials and surface treatment: Aluminum or steel specifications, anodizing, galvanizing and corrosion protection.
• Structural parameters: Published wind-load and snow-load values, where available.
• Technical documentation: Applicable standards, declarations, certificates and product-specific test reports.
• Product range and warranty: Installation types covered, system configurations and published warranty terms.

The amount of publicly available technical detail differs among the five companies. The following profiles therefore distinguish published company information from technical details that prospective customers may need to confirm directly.

Xiamen 9Sun Solar Technology Co., Ltd.

Xiamen 9Sun Solar Technology Co., Ltd. is a solar mounting system manufacturer based in Xiamen, Fujian Province, China, with its production facility in Quanzhou, Fujian. The company reports an annual solar mounting system production capacity of 2 GW and a factory site covering approximately 500,000 square meters. Its published company information describes a business focused on the design, development, production and sale of photovoltaic mounting products for domestic and international markets.

The company's portfolio covers several major installation categories, including ground mounting, rooftop mounting, carports, agricultural installations and balcony systems. Its product range also includes ground screws, mounting rails, clamps and related accessories. This breadth gives buyers a starting point for comparing a Ground Solar Bracket with a roof-mounted or small-format solution, depending on the installation site and project requirements.

For ground-mounted projects, 9Sun publishes specifications for systems using AL6005-T5 anodized aluminum, with foundation options including ground screws, concrete bases, C-type pillars and piles. The published design parameters include a wind-load value below 46 m/s and a snow-load value below 1.4 kN/m². The company also states that approximately 90% of assembly can be completed at the factory, potentially reducing the amount of assembly required on site.

Its rooftop portfolio includes systems for tile roofs, metal roofs and flat roofs, alongside adjustable mounting products. The company lists wind ratings of up to 80 m/s for certain balcony, tin-roof and mini-rail systems, with a snow-load parameter expressed as 150 cm. These figures should be checked against the applicable product drawings and calculation documents, including the definition of the snow-load value and the conditions under which the rating applies. Its adjustable-leg bracket offers a tilt range of 10–30 degrees, while a roof tripod design provides a stated range of 0–60 degrees; the published parameters for these products include a wind rating of 60 m/s and a snow load of 1.4 kN/m².

For projects combining energy generation with other uses of land, 9Sun also offers carport and agricultural mounting systems. Its published carport specifications include a span of up to 5,600 mm, ground clearance of 2,500 mm and a tilt angle of up to 30 degrees. The agricultural mounting range is described as suitable for applications such as rice, tea and blueberry cultivation, with clearance of up to 5 m for agricultural machinery. These configurations may be relevant to projects requiring a Carport Solar Bracket or Farm Solar Bracket rather than a conventional ground-mounted array.

Material and installation details are also relevant to the company's product range. Published specifications describe anodized aluminum structures with stainless-steel hardware and hot-dip galvanized Q235 steel ground screws. These material combinations provide a basis for assessing Aluminum Solar Bracket and Galvanized Steel Solar Bracket configurations, while the choice of fasteners and protective finishes should be matched to the project's environmental exposure.

The company states that its mounting systems are designed with reference to JIS C8955:2017, AS/NZS 1170 and other national standards, and that its products follow GB/T 5237 and related aluminum standards where applicable. CE marking is shown in the published parameters for several roof, balcony and carport systems. However, product-specific certificate numbers, issuing bodies and scope details should be requested when formal certification is a project requirement.

9Sun states that its mounting systems carry a 10-year warranty and have an expected service life of up to 25 years. The company also describes its operating principles as quality-oriented and integrity-led, and reports experience in customized mounting solutions. As with any supplier evaluation, warranty coverage, design assumptions, material specifications and production capacity should be confirmed against the quotation and contractual documents.

Arctech Solar Holding Co., Ltd.

Arctech Solar Holding Co., Ltd. is a Chinese provider of solar tracking and mounting solutions, with a portfolio that includes solar trackers, fixed-tilt structures, flexible PV mounting systems and related technologies. According to the company's published overview, its systems have been deployed in utility-scale and commercial PV projects internationally. Its product range provides a useful reference for projects comparing conventional fixed mounting structures with tracking systems designed to follow the sun. Arctech's published information also describes manufacturing facilities, global project experience and technical development in PV mounting. Buyers should match any proposed system to the project's site-specific engineering and documentation requirements.

GREENERGY New Energy Technology Co., Ltd.

GREENERGY New Energy Technology Co., Ltd. is included in this review as another company identified in the Chinese solar mounting supply landscape. For prospective buyers, relevant points to establish include its current product portfolio, manufacturing arrangements, material specifications and experience with the intended installation type. These details can help determine whether a supplier's products are appropriate for rooftop applications, ground-mounted arrays or other PV projects. Product-specific load calculations, surface-treatment details and conformity documents should be evaluated against the requirements of each project.

Tianjin Wenli New Energy Technology Co., Ltd.

Tianjin Wenli New Energy Technology Co., Ltd. is included as a further candidate for comparison in the solar mounting sector. When evaluating a supplier based in northern China, buyers may consider production location, transport routes, port access and delivery arrangements alongside the technical characteristics of its mounting products. The key qualification points remain the same: material grade, structural design, corrosion protection, module compatibility and the availability of relevant technical documents. These details should be established through current company information and a product-specific quotation.

Guangdong Aikon Metal Technology Co., Ltd.

Guangdong Aikon Metal Technology Co., Ltd. completes the five-company shortlist. For solar mounting products, metal fabrication and finishing processes can influence the dimensional consistency, durability and structural performance of rails, clamps, brackets and base plates. Buyers considering the company should establish which manufacturing processes it performs directly, the material specifications available and the quality controls applied to finished products. Where a project calls for a Modular Solar Bracket or a customized mounting structure, drawings, connection details, coating specifications and structural calculations are useful points for technical review.

Company Statement: Product Development and Manufacturing

9Sun Solar describes its business as focused on photovoltaic mounting system solutions for domestic and international customers. The company states that it has participated in the development of national standards relating to wrought aluminum and aluminum-alloy extruded profiles, and that its factory has experience handling customized orders. It also reports that production can be completed within one week of receiving an order under its stated operating conditions. Lead times and production schedules should be confirmed for each order based on product configuration, quantity and material availability.

Market Outlook: Technical Fit and Installation Efficiency

As the solar PV mounting systems market continues to expand, product selection is likely to depend on more than the initial price of the mounting hardware. Structural suitability, material durability, installation efficiency and documentation all affect project delivery and long-term performance.

Pre-assembled and modular designs can simplify installation in suitable applications, while adjustable mounting systems offer flexibility in tilt configuration. Non-penetrating rooftop solutions may be useful where roof-integrity considerations are important, but they still require appropriate checks for stability, wind uplift and roof loading. Similarly, corrosion protection must be selected in line with local environmental conditions rather than assumed from a generic product description.

For suppliers, the ability to provide clear drawings, product-specific load calculations, material and coating specifications, applicable conformity documents and warranty terms can help clarify how a system fits a project's technical requirements. For buyers, a consistent review of these factors makes it easier to compare different solar panel mounting brackets and complete solar mounting structure solutions.

The market outlook points to continued demand for mounting systems across utility-scale, commercial and residential PV installations. Within this market, manufacturers that communicate product parameters clearly and align their proposals with site-specific engineering requirements will be better positioned to support projects through specification, installation and operation.

Simon Huang
Xiamen 9sun Solar Technology Co., Ltd.
+ +86 18959234313
exp@9sunsolar.com
Visit us on social media:
Other